Search For Homes

Wednesday, November 24, 2010

Is a Tank-less Water Heater Right for You?

Is a Tank-less Water Heater Right for You?
Article From HouseLogic.com By: Joe Bousquin
Photo: Flickr CC License: roger mommaerts

Tank-less water heaters cut energy bills but aren't the right choice for everyone. Here's how to figure out if going tank-less makes sense for you.
If you're a hot water multitasker who washes clothes, dishes, and yourself at the same time, a low-capacity tank-less water heater could serve you a "cold water sandwich" or leave you high and dry. But tank-less water heaters, which heat water only on demand, are more energy-efficient than traditional water heaters, which warm water whether you need it or not. What's the best way for you to get into hot water? Read on.

Traditional vs. tank-less water heater
Traditional hot water heaters typically live in your basement and provide gallons of hot water at one time: an 80-gallon tank heats enough water to shower, run a dishwasher, and do a load of laundry simultaneously. But standby energy loss is significant with hot water heaters, and once you've exhausted the hot water supply, you'll wait 20 to 60 minutes for the heater to cook up more.

A tank-less water heater produces hot water only when you need it. When you turn on the faucet, water is heated on the spot as it flows through capillary-like pipes heated by either a powerful gas burner or electric coils. (There are no oil-fired on-demand water heaters on the market.)

Gush to a trickle
Although a tank-less water heater can pump hot water all day, it can't produce a large amount all at once. And it can snap you out of a hot shower bliss with the "cold water sandwich effect," a sudden splash of cold water that results from turning the hot water faucet on and off repeatedly.
A traditional tank heater puts out 7.5 to 9.5 gallons of water per minute (GPM), enough to shower, run the dishwasher, and do a load of laundry all at the same time. The typical tank-less water heater, however, puts out only 2.5 to 5 GPM, enough to handle only two uses at a time.
Be warned: Not all flow rates are calculated the same. Energy Star measures GPM based on a 77-degree increase in water temperature for the incoming supply, while some companies list their GPM flows at 35- and 45-degree rises. The more heat the water requires to reach the desired temperature, the slower the flow rate.

High upfront costs
A gas-fired tank-less water heater system costs $1,500 to buy and install, nearly double the price of a conventional gas water heater, and $575 more than a high-efficiency tank model. In addition, while a conventional water heater typically uses a half-inch gas line, a tank-less water heater requires three-quarter-inch pipe. That plumbing change costs from $25 to $40 a foot, potentially adding many hundreds to initial costs. ??On the bright side, your new energy-efficient unit may qualify for a federal tax credit of up to $300 on purchase and installation through 2011.
An electric tank-less water heater costs as little as $400 installed. But it doesn't qualify for a tax credit because it is less efficient than gas and is better suited for point-of-use applications, such as instant kitchen hot water, rather than a whole-house system.

Installing multiple units
One solution to the limited output problem is to install multiple on-demand units. Because it's small-about the size of a carry-on suitcase-you can place a tank-less water heater along any stretch of pipe--in the attic, basement, closet, or crawlspace. You can install two or three units to serve different parts of the house, or even dedicate a unit for a particular use, say a washing machine.
Multiple on-demand units increase overall energy efficiency. By bringing hot water close to where it's needed, you reduce energy loss and increase efficiency by 50% over a conventional hot water tank system, about $165 in annual savings for an average household.

Energy and money savings
According to the U.S. Dept. of Energy, a tank-less water heater is more efficient and uses less energy than a conventional water heater, providing a $25 to $107 in annual savings.

If your hot water use is low (less than 41 gallons per day), a tank-less water heater will be 24% to 34% more efficient.

If your hot water usage is high (about 86 gallons per day), a tank-less water heater is 8% to 14% more energy efficient.

Installing an on-demand unit at each hot water faucet gives an energy savings of 27% to 50%.

Visit houselogic.com for more articles like this. Reprinted from HouseLogic with permission of the NATIONAL ASSOCIATION OF REALTORS® Copyright 2012. All rights reserved.

© 2015 Dan Benton
Dan Benton - Realtor with Real Estate Brokers of Alaska
1577 C Street, Suite 101A., Anchorage, AK 99501
Phone: (907) 727-5279

Join Great Alaskan Homes on:
Blogspot - Pinterest - Twitter - Facebook - Google+